ALL-100AX Universal & Gang Programmer

Introduction

ALL-100AXユニーバーサルギャングプログラマ ALL-100AX is PC based IC device programmer, that has core processor with built-in 8K-byte cache.
ALL-100AX programmer has 68 sets of Precise Universal Pin Driver to provide high speed, low noise, accurate and reliable programming signals for various IC products including high speed low power devices recently released to market.
ALL-100AX can be setup for either single-site programming for engineering or multi-site programming for production. If required, up to 8 sets of ALL-100AX can be setup for multi-set operation so up to 64 sites can be programmed simultaneously to maximize production.
The supporting software is updated weekly on web site for check / retrieve through Internet. Programming of new products will not be neglected after purchasing.

Feature & Benefits

■Excellent performance : ALL-100AX’s high freq. core circuit design significantly cut down programming time for around 10% ~ 50%. Precise Universal Pin Drivers provide high speed, low noise, accurate and reliable programming signals for various IC products including high speed low power devices recently released to market.

■Wide range of IC coverage : ALL-100AX supports wide range of IC products including EPROM, EEPROM, Serial PROM, SPI memory, FLASH, MPU/MCU product types and DIP, SDIP, SOP, SSOP, TSOP, PLCC, QFP, QFN, SON, BGA package types.

■Easy to setup, operate and maintain : ALL-100AX setup and operation can be done easily by connecting Programmer to PC with Windows 2000 / XP / Server 2003 / Vista through USB port, load data file or read Master IC, then select functional options (Program, Verify, Auto...etc.) to start programming. The self-diagnostic utility makes programmer easy to checkout / maintain.

■High expansion flexibility : From development / engineering stage using ALL-100AX single-site programming to limited production stage using ALL-100AX multi-site / multi-set programming, further to mass production stage using AT3-3XX automated programming, high expansion flexibility of programming platform is well prepared in advance.

■Timely supporting software : The supporting software is updated weekly on web site for check / retrieve through Internet. Programming of new products will not be neglected after purchasing.

■World wide service : Distribution channel covers 35 countries worldwide, all inquiries / problems can be served easily and timely.

Specification

Controller	Core controller	16 bits high freq. core control circuit with big sized FPGA & CPLD
Functions	Key functions	Load File, Read Master, Program, Verify, Auto, ID Check, Checksum, Blank Check, Erase, Security, Protect / Unprotect, Edit, Function Configuration, Self Test
Support devices	IC types	EPROM, EEPROM, Serial PROM, SPI memory, FLASH, MPU/MCU…etc.
	IC packages	DIP, SDIP, SOP, SSOP, TSOP, PLCC, QFP, QFN, SON, BGA…etc.
	IC leads	8 pins ~ 300 pins
Device contact	Default	DIP48 ZIF single socket on Programming Module
Device contact	Others	Dedicated sockets on Programming Module per IC package type
I/O channels	Pin Driver	68 sets of Precise Universal Pin Driver
Parallel programming	programming	Multi-site programming. Up to 8 sites per set.
Operation control	Base Unit	YES button : Start programming ON indicator : Programmer on / ready BUSY indicator : Under programming
Operation control	Socket Module	OK indicator : Pass programming
Data transfer interface	Transfer port	USB x 1
Data transfer interface	Transfer speed	USB1.1 : 12 Mb/sec USB2.0 : 480 Mb/sec
Host computer requirement	CPU/Memory	An Intel Pentium 4 or compatible processor with 512MB of RAM
	Interface	At least one USB port is available (V1.1 / V2.0)
	OS/Free HDD space	Windows 2000 / XP / Server 2003 / Vista operation system 50MB free hard disk space
	Optical Drive	CD ROM / DVD ROM Drive
Power	Power source	100 ～ 245VAC / 50-60Hz
Power	Power consumption	～0.5 A
Dimension	Main body	(W) 1500mm x (D) 260mm x (H) 100mm
Weight	Main body	～ 4.0Kg
Operation environment	temperature	0 ~ 40℃ (32 ~ 105?)
Certification	quality standard	CE certified
＜Standard accessories＞・ALL-100AX Base Unit (4x pin driver cards installed) ・Single site DIP48 ZIF socket Programming Module ・USB cable ・Driver S/W and User Manual in CD-ROM ＜Option accessories＞・Dedicated single-site socket Programming Module ・Dedicated multi-site socket Programming Module ・Adapter / Converter Optional accessories : Please check http://www.falcon-denshi.co.jp web site for appropriate P/N of Programming Module / Adapter / Converter for IC package to be programmed

Inquiry

<Business Hour> Week day10:00-17:00
Loaner unit is available at freight collect for Japanese domestic customers.