2014

10/16

Articles about Falcon Denshi is published in ARM Core R & D Reference Magazine APS Separate Volume 9. For detail

10/14

We will participate in Embedded Technology 2014 Show that will be held in Pacifico Yokohama from November 19 to 21, 2014. Our booth # is D-06 right next to the center stage inside of Yokohama booth. 8 site x 8 units = 64 gang, ALL-200G will be exhibited. Movie on programming, taping 3D vision inspection service with IP protection system that is complying with automotive standard will be shown. We are also exhibiting the world fastest gang programing in its class and category. Gang programmer for Japanese amusement industry supporting will be separately exhibited in sweet room # CM2 for private demo. At ET/IoT Festa,,to welcome you all Taiwan whisky and Chinese snacks will served.

10/09

Device list of fast gang programmer Falcon-32, Falcon-64 is added. 8GB data can be transferred in about 2 min. (speed depends on the performance of input PC). In 10 min. 64 pieces of 8GB eMMC can be programmed & verified in gang (time depends on the performance of IC itself). We also provide programming service in Japan and overseas.

06/20

Link for move on vision inspection on tape system (HL-730) and 6 side 3D vision inspection system (HL-750) are added.

06/12

An article on Falcon Global ROM MCU programming service and vision inspection service is published in organization magazine of NEDIA (Nippon Electric Device Industry Association).

01/15

In Semiconductor Industry News Paper Internepcon Japan 2014 Special Edition dated Jan 15h, an article on world fastest in its class gang programmer model Falcon-32, Falcon-64 for eMMC, Managed NAND and tape & tray full auto programming system AT3-350H, Desktop auto programmer are published. For detail including special promo

2013

12/12

In Semiconductor Industry News Paper dated Dec. 11th, word fastest gang programmer in its class for Japanese amusement customer Falcon-7 is introduced as new product article. For detail

11/26

Our participation in ET2013 was completed with success. We thank you for more than 300 customers who visited our booth and those who cooperated with us. We will do our best to provide best service by following up your inquiries. In addition to fast gang programmer Falcon-7, we will keep releasing new products to the market hoping that we can provide more help to our valued customers.

10/29

We will participate in Embedded Technology 2013 Show that will be held in Pacifico Yokohama from November 11 to 22, 2013. Our booth # is C-13 inside of Yokohama. We are introducing word fastest gang programmer in it class for Japanese amusement customers.

08/23

In this autumn, fastest programmer in amusement industry will be released. Write access speed is 18nsec. 1Gbit data transfer speed is 3 sec. 64Gbit CRC verify is 42 sec. For detail This product is released only to customers in Japanese amusement industry. For more inf., please fill in the form and make a request.

04/15

Our programming service and programming tools are introduced as ARM core PARTERS. Please click on the following link to check on R & D partner of each IC suppliers including Fujitsu, Toshiba, ST, freescale, Texas Instruments, nuvoton, Atmel. For detial

03/06

Information of Campaign Global Rental Service
Introducing specially priced refurbished auto programming system as sales promotion campaign (this service is already discontinued). We are also offering global rental service on those semiconductor testing and programming equipment (this service is discontinued).

02/06

New product release AT3-310A Auto Programming System
Falcon Denshi is started to sell new auto programming system AT3-310A that can perform maximum 2200 UPH with 4 nozzles. It also carry out not only auto programming & verify, but also carrier media conversion such as tray and tray, dot marking.

01/29

New product release HL-730 2D IC Vision Inspection System on Tape
Falcon Denshi is started to sell new 2D IC Vision Inspection System on Tape HL-730 that can make vision inspection check on IC on tape. Inspection items are counting the # of IC, checking IC directions and dot mark, log lot #, inspecting leads, cover tape, etc.

2012

12/13

At ET2012, we made collaboration with various MCU suppliers and DAFS (Distributors Association of Semiconductors & Components of Japan). We thank you for all customers who visited our booth. We will do our very best to provide best service to our valued customers.

11/08

On the second day of ET2012, Nov 15 from 17pm, ET Festa will be held. Please visit DAFS/Falcon booth for drinks and snacks to talk about the future of embedded industry. For Detail

11/05

Renesas introduced us as ET2012 exhibition partner. For detail

09/04

We will participate in Embedded Technology 2012 Show that will be held in Pacifico Yokohama from November 14 to 26, 2012. Our booth is located inside of DAFS (Distributors Association of Semiconductors & Components of Japan) booth. Device programmer, demo on MCU programming will be show in our booth. We will also display the instruction of global programming service. Please feel free to make new IC support request and inquire global programming service.

04/13

We will participate in Automotive Engineering Exposition 2012 held in Pacifico Yokohama from May 23 -25, 2012. Global programming service (Japan, Taiwan, Hong Kong, and Suzhou) will be displayed in panel and movie. For factory visit and meeting, we would like to suggest you making appointment from our web page. For appointment registration

04/05

Falcon Global programming, taping, marking service is listed as Alliance Partner of Renesas in their official web page. For detail

03/28

We thank you for all customers who visited our booth at ELECTROTEST SHOW. We will do our very best to offer testing and vision inspection solution

03/26

Falcon Denshi was registered as an member of DAFS (Distributors Association of Semiconductors & Components of Japan) in the board of directors meeting held on March 14, 2012. DAFS Official Home Page

02/24

The link of semiconductor suppliers are update. For Detial
Falcon/Hi-Lo System programming tools support more than 180 brands and we are in corporation with many semiconductor suppliers who introduce our tool in their web page.

01/24

Information is campaign is added. For detail
Campaign is valid till end of March, 2012.

01/17

Legacy IC requires high voltage programming. To support such legacy IC, ALL-11 series programmer, model ALL-11AE became available as revival product for limited qty from Jan. 18th. Please check with us at ELECTROTEST Show, booth #49-7 or on inquiry of our web page for detail.

2011

12/19

socket cleaning and plating service is added in Renesas web page
（this service is available for high volume customer）

12/06

We will participate in ELECTROTEST SHOW 2012 held in Tokyo Bigsight from Jan. 18 -20, 2012.
We will exhibit Falcon and HI-LO branded offline programing tools, programming service, socket cleaning & plating and MPU embedded vision inspection system.

11/01

Falcon Denshi K.K. is registered as a member of JASVA (Japan Semiconductor Venture Association (In 2013, this organization is renewed as NEDIA, Nippon Electric Device Industry Association http://www.nedia.or.jp/)

09/12

We will participate in Embedded Technology 2011 Show that will be held in Pacifico Yokohama from November 16 to 18, 2016. Our booth # is C-21 inside of Yokohama booth. We will be showing global programing & taping service in video. We also offers private demo on our programing tool in a separate sweet room CM2. We would like to suggest advance appointment for arrangements of private demo.

05/26

A list of FAQ is added based on questions and inquiries from our valued customers.

03/18

New portable single site programmer, FLASH-100AM targeting for amusement IC, Flash, MCU and logic IC is added.

03/18

Link of distributors and business partners is updated.

03/12

We would like to express our deepest sympathy on those who are affected by the Great East Japan Earthquake.

2010

12/06

We thank you very much for visiting out booth at ET2012 Show. We will do our very best to meet your requirements on programming tools and programming service.

04/15

Link of distributors and business partners is updated. For detail

02/22

List of device programmer accessories is added.

01/28

We thank you very much for visiting out booth at INTERNEPCON 2012 show. We will do our very best to meet your requirements on programming tools and programming service.
# Photo of our booth

01/15

・We will program logic IC, MCU, FLASH from one piece as programming service. For detail
・A list of Links of Semiconductor suppliers who are listing our products and service are added.For detail
・Providing free cleaning kit service is discontinued. We start providing electro chemical cleaning service for high volume customers For detail
・We start to provide development service for semiconductor testing and vision inspection tools. For detail

2009

12/17

We will participate in INTERNEPCON JAPAN 2010 . We will be showing global programing & taping service, auto & manual programming system, taping system, 3D vision system, marking system in video.
Date: January 20 – 22 AM10:00-PM6:00 22nd is till PM5:00l
Place: Tokyo Bigsight Booth East 41-7

12/14

ALL-100 the latest software down load become available.
For registration and download
Certificate application form on export trade order is added.
To apply

11/04

Introduction example of our products is added.
For detail